 |
|
 |
Measurement with Both Eyes |
|
While both eyes open, which means at the natural condition, it takes the measurement. Thus, there would be less Instrumental Myopia, and allows you to achieve more precise measurement. |
|
A.M. MODO |
|
It measures the pupil diameter at 0.1mm step (minimum 2mm) simultaneously
with refractive value. The measurements are then presented on the monitor.
Subsequently, you can print the results and check the constriction of pupil.
Studies have indicated that pupil constriction is evident when the eye
is accommodating. Thus, the pupil diameter measurement function allows
you to more precisely ascertain whether the subject’s eyes are accommodating
or not. Another option is to present the image via video thus giving you
precise image analysis of the pupil constriction as well. The ideal refractive
value for 50, 40, 33, 25, and 20cm is displayed, thus you can compare the
patient data with the ideal value more easily as it relates to the actual
distance of the Near Point Card.
It can measure the pupil diameter necessary for Multi Focus Contact Lens,
IOL, and so on. |
|
HI SPEED MODE |
|
By connecting with the computer and using our dedicated software - WCS-1
(optional), you can measure the SE value and Pupil Diameter at 0.2 seconds
step. In addition, you can analyze these data with spreadsheet software
like Microsoft Excel.
Unlike the previous model, WR5100-K, this Hi Speed Mode allows you to more
dynamically measure the eye. In Hi Speed Mode, since the refractive value
is calculated on the entire meridian instead of a specific one, you can
understand the refractive value precisely.
●Example ; 33 years old male
This is the data of moving the Near Point Card every 20 seconds.
With this data, the subject eyes are accommodating from the ideal value of -2.00D to -5.00D. Additionally, the pupil diameter is constricting from 4.0mm to 3.2mm. (Blinking at the same interval.) |
|
Data Output |
|
Video Output／It allows to show the same image as internal monitor on an
external monitor (NTSC System)
RS232C Interface／It allows you to send the measurement data.
Software／WCS-1 (Option) HI SPEED MODE Control software
MDC-1 (Option) The Measurement Data Collection software |
|
Indication of SE (Spherical Equivalent) |
|
You can confirm the change of accommodation
as the SE is indicated on the monitor each
time (3 data). |
|
Easy Measurement |
|
Since it is adopting the Open View Window,
you can measure a patient with glasses and
contact lens as well as a patient with the
IOL, easily. It also allows you to confirm
the prescription. |
  |
 |
|
